7 Turbo Y-Pipes. (no boots or clamps)
1 5/8" ends 2 1/4" center 7" long center raw $70
Same with Polish Ceramic Coate $90
1 /5/8" ends with 2" center 4-7" long center raw $80
Same with Polish Ceramic Coate $95
1 3/4" ends 2 1/4" center 7" long center raw $85
Same with Polish Ceramic Coate $100
1 3/4" ends 2 1/2" center 7" long center raw $90
Same with Polish Ceramic Coate $110
7 Turbo Boots
    Silicone hoses are stronger and felxible then
    ordanary hose. All are 3" long cuts.(most are blue but we do get some black sometimes)
    1 5/8"$10ea        1 3/4" $10ea       2" $12ea       2 1/4"$14ea      2 1/2" $17ea    3" $24ea   4" $28ea
    We also have 45* elbows, hump hose, stright hose, reducers, and 90* elbows
    Call for prices and size

8 "CHEEP" Turbo to Manifold Adapter Boot
2 1/2" to 3" reducer
Rubber non-silicone boots at low price (blow throu use only)
$13.99 ea.

9 T-Clamps or Turbo clamps. Made in the USA from Stainless steel.
1 5/8" T-Clamp             $5.75 ea.
1 3/4" T-Clamp          $6. ea.
2" T-Clamp                    $6.25 ea
2 1/4" T-Clamp             $6.50ea
2 1/2" T-Clamp         $7.ea
3" T-Clamp                   $7.75ea
4" T-Clamp                $8ea
T-Clamp Kit for most turbo set ups.
4x 1 5/8" and 4x 2 1/4" T-Clamps for $45 (no mix and match)

10 Dura-seal Copper Exhaust Gasket made from Tough C11 Annealed Copper 1 1/21" ID Set of 4
$20. Set

11 Turbomania Book
$20 ea. We have other Turbo books also.

12 and 13 Performance Pressure Plates.
Iif you are going to add power than you will have to upgrade!
From stage 1, 2 and 3 pressure plates to HP disc, Black Magic, 4 puck to Daiken.
We have it and can help you pick the correct cluch and pressure plate combo for your combo! Click here

14 NGK High Performance Spark Plugs
BHS   1/2"rech x 14mm
BES   3/4"reach x 14mm
DEA 3/4" reach x 12mm
$2.50 ea.
We can help you on the correct plug temp and size to get.

15 Type 1 Intake Gaskets With Large big beef seling surface
$3 pair

16 Super Flow and Comp Eliminator IntakeGasket
$6 pair

17 Turbo Center Cartrage Drain Flange Gasket (oil output)
T25 lower $4ea.
T3 and T3/T4 $6ea
T4 $6ea

18 Turbo Center Cartrage Oil Inlet Flange Gasket (oil input)
T25 $4ea.
T3 and T3/T4 $6ea
T4 $6ea

19 Turbo Header Flanges 3/8" thick
T-3 $15 ea.
T-4 $18 ea.
3 Bolt 2" center $10 ea.
3 Bolt 2 1/2" center $12 ea.
waste Gate Flanges $12 ea
5 bolt exhaust flange for T3/T4 and T4 turbo $25ea
4 bolt exhaust flange for most T3 turbos $11ea
T25 exhaust flange 5 bolt $20ea.

20 Carburetor Manifolds click here

21 Carburetor Air Cleaners for Holley 2 barrle and 4 barrle.
Pro Flow air cleaner with minimum flow restriction washes clean with soap and water $29.99 ea.
Webber DCOE Side-Draft Air cleaners in a varity of sizes start at $14.99 ea.

22 Fram High Flow 3/8" Fuel Filters High Technology Filteration $ 6 ea.

23 One Way Check Valve Used on Webber side draft carburetor to
increast fuel pressure when boost is applyed $10 ea.

24 Performance Holly Carbs.

25 Turbo's

1 Holley Fuel Pressure Regulators.
   $36.99ea (works from 3-5psi)
   $50 ea. With all the fittings for 3/8" fuel line.
   (no gauge)
$45 Fuel pressure regulator for use with Weber
side draft carbs. Will raise fuel psi with boost.

2 Gauge Mount for Gauges (Our boost gauges)
    Great for under the dash or off road applications
    $15.99 ea.

3 Boost Gauges VDO
30" HG Vacuume 20 PSI Boost Gauge $49.99 ea.
30lb boost gauge $59.99

4 End Castings
$79.99 For all street and off road turbo kits.
$129.99 Polished End Castings.

5 Electric Fuel Pumps. We have 3 types of fuel
    pumps. Click here for info.

6 Crank Case E-Vac Valve Kit a must on turbo
   combos. $35.00 per kit. More info click here.