This turbo system can be used as a off road kit or drag race kit.

•Header is made from 14gauge 1 1/2 piping with 3/8" flanges.
Why 1 1/2"? Its all about air speed and response from the turbo. A must for making low-end power and to elimanate turbo lag.
•Polished Chromex Ceramic Coating or Black Velvet ceramic coating
of all piping is included.
•Each turbo kit comes with our ProGate 38mm wastegate. Adjustable from 7-28lbs boost. (with a boost controller, not included) includes waste gate dump pipe also ceramic coated.
•"Y" pipe. 16 gage,We can coat the header system black velvet and coat the "Y" pipe chromex at no extra charge. The "Y" pipe connects the turbo to your stock end castings.(not in kit) The "Y" pipe has a 2" inlet that "Y"s off into 1 3/8" pipe then steps out to 1 5/8" at the ends. The 1 3/8" is for air speed and will support over 400hp with the size.
• Exhaust pipe is also ceramic coated and mounts off the turbo with a 3/8" thick flange with 16 gage piping that makes a 90* bend.
We can custom make any style exhaust for you like the one in the pick or add a muffler. price range from $50 extra. Call for info
• We can add a O2 sensor bung for wide band rich/lean monitors and or gauges add $45
(includes the 02 plug for when not in use)
•We can add Crank Case E-Vac add$65. This will help stop your motor from producing extra blow by and oil leaks. Will keep your motor clean. Includes 1x Race Check Valve. It is a good idea to have sand seal with this set up. Recommended on all drag race and high RPM combos.
• 100% New T3 turbo, can be rebuilt if needed in the future, comes carbon sealed for draw-through use, good for fast spool up and response on combos of up to 250hp. You can upgrade to the T3/T4 turbo for an extra $250 this turbo is good for up to 325hp. For real power step up to the GT33 turbo for up to 400hp. add $375
For polished intake/compressor housing on any of the turbos add $60
Ceramic coated turbo exhaust housing add $95
Ceramic coated center section of turbo add $65
•Custom hand made raw aluminum manifold with 3/8" thick carb flange and extra support mount. This is 100% Tig welded and looks like a work of art! Polished aluminum manifold add $65
• Holley 350 or 500cfm two with Turbo-Adjust-A-Jet. These carbs will self in-rich once on boost. So they drive like a non turbo combo with smooth throttle response. The 350cfm carb will support up to 225hp and the 500cfm carb will support up to 350hp. All of our Holley's come with boosted power valve that will increase the amount of fuel once on boost. We install our " Turbo Adjust-A-Jet" in all Holley carbs so there is no changing of main jets, just turn a screw for full main jet control.
•Comes with washable gauze air cleaner that you can re-use over and over.
For Outerwear cover for your Holley filter for off road use add $20
We have Red, Blue, Black or Yellow Outerwear's

•3x silicone boots of the correct size, 8x "T" stainless clamps, oil feed and drain fittings, turbo and wastegate boost hoses, carb boost line, all nuts and bolts are included along with a tube of silicon for the exhaust pipes (yes no gaskets on turbo systems) Most important 6 days a week tech support! Give us a call and ask us a question!!!

This is a complete kit with everything you need to make big power!!!!
The base kit will support up to 250hp with ease!!!
For more options on this kit click here