•Venturies in all sizes are available.
If you need to drop a jet size, you could go up in venturie to free up some hidden horse power.
If Your motor is larger than 1600cc, the stock 28 mm venturie is restricting your motors proformance.
All the Kadron's come with a 40mm throttle bodies and only 28mm venturies out of the box new or used.
This setup works great on small displacement, slow air speed motors. ( like the stock cam 1600cc )
But if your motor has more compression, a performance cam, larger in displacement or ported heads
take advantage of changing the venturies.
28.0 (stock)   30.0   31.0   32.0 and larger are available
$50.00 for the pr .
I need help changing my venturies click here. What venturie should I use? click here

( I will install it for free!!! )
Labor options for your Kadrons.

•Custom aircleaner mounts ( Air Top Kit ) This kit will add up to 7.cfm @25" (1 to 7hp)
I have tested this kit on the flow bench,   dynoed motors and my
race car.I was so impressed that I had to offer it to you in a kit.
The air cleaner top kit will replace the stock air cleaner mount bracket and center stud.
The stock tops and all aftermarket aircleaners will fit. You still keep your air cleaners and all it's hardware.
The kit comes with instructions and all hardware including 2x plugs to cover the large original holes.
$13.00 for the kit.

( I will install it for free!!! )
Labor options for your Kadrons.

To place your order click here

•Float bowl overfill ( Vent Kit ) "Stop the slosh".
If you leave hard from a light, try to do a burnout, or drive over uneven surfaces.
( like in a sand rail or a buggy ) and your motor stumbles, this will solve your problem.
You need this kit to stop the fuel from spilling over in to the carbs.
$7.50pr for the kit

( I will install it for free!!! )
•Main jets.
125, 130, 135, 140, 145, 150, 155, 160, 165, 170, 175, 180, 185,190
$8.00 each If you need help changing the main jets Click here

•Idle jets.
50, 55, 60, 65. 70, 75, 80
$8.00 each If you need help changing the idle jets Click Here

•Urethane / Vinyl bushed throttle bodies. (not brass)
New kadrons come loose out of the box. This is "NOT OK",
If you need to have them rebushed most places will use a brass bushing.
The brass tends to wear quite fast. Urethane/vinyl allows for a
tighter fit with out the friction of brass. This means longer
lasting, tighter fitting and no more intake leaks to chase!
$50.00 each or $95.00 for the pr
Labor options for your Kadrons.

The 46mm IDK Power Kit.
So you are thinking of getting rid of your carbs because your building a bigger motor or the 40mm
kadrons you have now are just not enough. What if you could just upgrade your carbs that you have now.
How does 46mm sound ? The new LowBugget.com Power kits.
The kit includes:
(2) NEW BIG 46mm throttle bodies that allredy come with Urethane/vinyl and 1/4" brass bushings.
(2) new C&C venturies of any size to fit your motor combo, these are specially designed to work
with the 46 mm throttle bodies.30mm to 40mm
(2) Idle jets of any size, 50, 55, 60, 65. 70, 75, 80
(2) main jets of any size, 125, 130, 135, 140, 145, 150, 155, 160, 165, 170, 175, 180, 185,190
(1) Air Top kit that adds up to 7cfm,
(1) Vent Kit that will allow you to run as hard as you want without that stumble that has plagued the Kadrons.
All the gaskets to make it an easy swap from the stock 40 to a 46 IDK.
Changes to your manifolds should be made to run this kit.Ask for help.
$249.99 with all the instructions.
Labor options for your Kadrons.

The 48mm IDK Power Kit.
Now we are talking big! this kit is for all out racing and not for small low rpm motors.
For street use, you should run vacuum advance. click here for info about SVDA for kadrons.
This kit will flow over 360cfm each and suport over 180hp and a lot of tourq with the write manifold.
We can make the changes to the carbs to suport more power. click here for info. and seting up.
The kit includes:
(2) BIG 48mm throttle bodies that allredy come with Urethane/vinyl and 1/4" brass bushings.
(2) new C&C venturies of any size to fit your motor combo, these are specially designed to work
with the 46/48 mm throttle bodies.30mm to 40mm
(2) Idle jets of any size, 50, 55, 60, 65. 70, 75, 80
(2) main jets of any size, 125, 130, 135, 140, 145, 150, 155, 160, 165, 170, 175, 180, 185,190
(1) Air Top kit that adds up to 7cfm,
(1) Vent Kit that will allow you to run as hard as you want without that stumble that has plagued the Kadrons.
All the gaskets to make it an easy swap from the stock 40 to a 48 IDK kit.
Changes to your manifolds should be made to run this kit.Ask for help.
$299.99 Call for info.

To place your order click here

The 1600T kit "Turbo power on a 1600cc motor?"

Back to the Low Bugget.com main page

Labor options for your Kadrons.

More Kadron Carb parts