ALUMINUM SPINDLE - MOUNT WHEELS
Light weight rails and buggies can shed pounds eliminating front brakes,
drums or rotors by using our Spindle-Mount wheels. Both use either the
Chrome Steel center cap or the trick-looking Aluminum Hex-top cap with a
larger outer ring that covers the weld on the Polished Aluminum Wheel.
Both are for
OFF-ROAD USE ONLY

Polished Aluminum Sand Rail Wheels are recommended for
ultra-lightweight rails and buggies ONLY




Sealed Wheel Bearing Kit, 4pcs (2 inner 2 outer)
O.D of bearing is 52mm both sides.


Center Cap for Spindle-Mount Wheels, Pair


Cast Aluminum Spoke Wheels are recommended for
light-weight rails and
buggies ONLY
uses stock Link Pin Bearings & Seals. Includes wheel bearings with races
installed, seal and chrome dust cap w/ logo

Cast Aluminum Spindle-Mount Wheel Kit, Link Pin, 15 X 4 each


Chrome Dust Caps w/o Logo, Pair


Ball Joint Bearing Spacer, Pair


Link Pin Bearing Spacer, Each
ALUMINUM CENTER HUBS
when front brakes are not needed, lighten the load by
eliminating the wight of a brake drum and shoes while
running your bolt-on wheels. Choose for use with the
VW Kingpin Spindles or our combo spindles p/n 16-2518

Aluminum Hub 5 on 205 for VW Spindle
uses stock bearings

Aluminum Hub 5 on 205 for Combo Spindle
uses combo bearings

LINK PIN CENTER HUB
Turn your 5 lug front wheels into spindle mounts. This
center hub is cut down, eliminating the weight of a drum
and shoes but stills allows you to run your bolt-on
wheel. Uses stock bearings. Does NOT fit with combo
spindle bearings.

Center Hub, Link Pin, Each (Boxed)