Back to LowBugget.com main page Back to the main Racer Parts page A.J.Sims Heads More Head for your Buck!!! 1600T Turbo kits Sand, Street,Strip we turbo it! kadron parts and kits From Mr.Kadron!!! E-mail your questions. place your order

Barrel Shims / Spacers and Copper Head Gaskets. You would use barrel spacers to move the barrel out to give more deck height. They are made of steel and should use a sealant to seal them up when installing. We have them for 90.5, 92 and 94mm barrels. From 0.01" .02" .03" .04 .06" .08" For $10.00 per set. .09" and .120" for $13.00 per set.

Copper head gaskets. You would use a copper head gasket to help seal up the head to barrel and to add more deck volume to lower the compression. If this combo will see a lot  of rebuilds like a race motor. Than a copper head gasket can be used to lower the amount of times to resurface the heads. Each time you remove a pr of heads you should resurface them but with copper gaskets you can just replace the gasket insted. You can also use a copper head gasket to set your motor combo to run 0.0" deck then add a .04" copper gasket to get .04" total deck with most of the burn in the chamber now.Click Here for more info we have copper head gaskets for 90.5, 92 and 94mm barrels. from .04"and .06" thick All are $29.99 per set of four.